Siemens 6ES7195-7HA00-0XA0

Brand: Siemens
Model: 6ES7195-7HA00-0XA0

Inventory situation: Goods are available in stock.

Product features

An active bus module made especially for the Siemens ET200M distributed I/O system is the Siemens 6ES7195-7HA00-0XA0. Two crucial parts that cooperate to guarantee efficient data transfer and power distribution in the system are housed in this module: interface modules (IM153) and power supply modules (PS).

The Siemens 6ES7195-7HA00-0XA0's support for hot-swappable functionality is one of its primary characteristics. This implies that you can swap out the linked PS or IM153 modules while the system is operating without halting the entire industrial process. Furthermore, an integrated backplane bus in the Siemens 6ES7195-7HA00-0XA0 facilitates rapid data exchange between modules, guaranteeing precise and timely signal transmission.

The Siemens 6ES7195-7HA00-0XA0 has dependable and unambiguous electrical parameter specifications. Its DC input voltage range is 20.4 V DC to 28.8 V DC, and its maximum input current is 6 A (for protection, it's crucial to use an external fuse). The connected I/O modules are powered by a steady 5 V DC output from the backplane bus power supply. This 5 V DC supply's maximum output current is 1 A when using 8 modules and 1.5 A when using up to 12 modules in combination with an IM153-2 HF module. Its adaptability allows it to be used with a variety of system sizes.

The Siemens 6ES7195-7HA00-0XA0's versatility is increased by its compatibility with multiple Siemens modules. It is compatible with IM153 interface modules (IM153-1, basic IM153-2, and high-performance IM153-2 HF) and S7-300 PS series power supply modules (like the PS 307). Because of this compatibility, users can create systems that are tailored to their own requirements. With a maximum data transfer rate of 12 Mbps, it also supports the PROFIBUS DP communication protocol (via the IM153 module), guaranteeing quick and reliable communication with S7-300/400 PLC systems.

Specifications

Model	6ES7195-7HA00-0XA0
Name	Siemens ET200M active bus module
Input voltage	20.4 V DC to 28.8 V DC
Maximum input current	6 A
Dimensions	92 mm (H) × 97 mm (W) × 30 mm (D)
Mounting	Standard DIN rail, wall mounting
Protection rating	IP20
Operating temperature	0°C to 60°C

Precautions

First, adhere to the stringent instructions for hot-swap operations with the Siemens 6ES7195-7HA00-0XA0. Despite the module's ability to hot-swap-that is, swap out PS or IM153 modules while the system is operating-you must first confirm that the IM153 module you are connected to, like the IM153-2 HF, can do the same. Never omit Siemens's formal procedures; for instance, don't pull out a module suddenly. Inadequate hot-swapping can cause needless downtime by damaging the Siemens 6ES7195-7HA00-0XA0 or stopping the industrial process.

Second, make sure the Siemens 6ES7195-7HA00-0XA0 is powered and configured correctly. This module requires a compatible power supply (PS) module to function; Siemens S7-300 PS series modules, such as the PS 307, are required. Verify the input voltage as well; the Siemens 6ES7195-7HA00-0XA0 needs between 20.4 and 28.8 V DC. The module may be burned if the voltage is used outside of this range. Installing an external fuse is also advised by Siemens in order to safeguard the module against overcurrent, which is essential for long-term use of the Siemens 6ES7195-7HA00-0XA0.

Third, before connecting other modules to the Siemens 6ES7195-7HA00-0XA0, make sure they are compatible. Only the IM153-1, basic, and high-performance IM153-2 HF IM153 interface modules are compatible with this module. The Siemens 6ES7195-7HA00-0XA0 and the S7-300/400 PLC system will no longer be able to communicate if incompatible IM modules are used. To save time and money on mismatched parts, always refer to Siemens' official compatibility list.

FAQ

Q: What is the Siemens 6ES7195-7HA00-0XA0, and what is its primary function?

A: The Siemens 6ES7195-7HA00-0XA0 bus module is intended for ET200M distributed I/O systems. Its main purpose is to install one power supply (PS) and one IM153 interface module in ET200M systems by acting as a bus connection unit. This module includes a bus module cover for full assembly and allows for module replacement during operation, also known as "hot swapping."

Q: Which systems is the 6ES7195-7HA00-0XA0 compatible with?

A: The 6ES7195-7HA00-0XA0 is made especially to work with SIMATIC ET200M systems. It is essential to distributed I/O setups that make use of IM153 interface modules. The module integrates easily with other S7-300 I/O modules in ET200M applications and is a component of Siemens' all-inclusive industrial automation solution.

Q: What are the key technical specifications of the 6ES7195-7HA00-0XA0 bus module?

A: The key technical specifications of this SIMATIC DP bus module include:

Dimensions: 97mm x 92mm x 30mm (Width x Height x Depth)
Weight: Approximately 111g
Application: Specifically designed for ET200M systems
Special Feature: Supports hot swapping (module replacement during RUN operation)

Hot Tags: siemens 6es7195-7ha00-0xa0, China siemens 6es7195-7ha00-0xa0 suppliers, SIMATIC S7 300 SM 331 SM 332, SIMATIC S7 200 EM222 Digital Output Module, SIMATIC ET200SP Digital Input Module, SIMATIC ET 200SP Base Unit, siemens plc module, SIMATIC S7 1200 CPU