Siemens 6SL3130-6TE23-6AA3

Brand: Siemens
Model: 6SL3130-6TE23-6AA3

Inventory situation: Goods are available in stock.

Product features

The Siemens 6SL3130-6TE23-6AA3 is a high-performance Sinamics S120 Smart Line Module intended for industrial automation. This 36kW power module, part of Siemens' recognized SINAMICS line, provides reliable operation with 3-phase AC input (380-480V, 50/60Hz) and 600V DC output at 60A, making it ideal for demanding applications in manufacturing, water treatment, and material handling systems. Its booksize design and internal air conditioning allow for a small installation, while the accompanying Drive-CLiQ cable facilitates interaction with Siemens control systems such as the SINUMERIK 840D sl.

Key characteristics include 100% continuous regenerative feedback, which recovers energy while braking and reduces operational expenses. The 6SL3130-6TE23-6AA3 offers vector, servo, and V/f control, allowing for fine motor management of both asynchronous and synchronous motors. Safety is prioritized with integrated STO (Safe Torque Off) and SBC (Safe Brake Control) capabilities that meet SIL 2 and PL d standards. It is designed to survive tough industrial settings while maintaining good electromagnetic compatibility.

The 6SL3130-6TE23-6AA3 is designed for flexibility and works effortlessly in multi-axis configurations, controlling up to 6 extra servo axes when combined with NX10.3/NX15.3. It meets international requirements like as CE and cULus certification, assuring compliance in global markets. Whether used in machine tools, cranes, or renewable energy systems, this 6SL3130-6TE23-6AA3 provides energy efficiency, modular scalability, and long-term reliability-all attributes of Siemens' industrial innovation.

Specifications

Voltage range	380-480V AC (three-phase)
Frequency	50/60 Hz (tolerance ±5%)
Maximum input current	60A (continuous)
Power factor	≥ 0.95 (requires recommended line reactors)
DC bus voltage	600V DC
Control methods	vector control, servo control, V/f control (supports asynchronous/synchronous motors)
Communication protocols	PROFINET, PROFIBUS, EtherNet/IP (optional CBE20 communication board required)
Drive interface	3 Drive-CLiQ connectors

Precautions

Always install the Siemens 6SL3130-6TE23-6AA3 in a clean, dry environment. Keep at least 100 mm of free space above and below the module for proper ventilation. Poor airflow can cause overheating and damage the internal components. Use the correct wiring: connect the incoming power to the LINE/NETZ L1, L2, L3 terminals and the motor cables to the LOAD/LAST L1', L2', L3' terminals. Mixing these connections can lead to permanent damage. Always ground the module properly using a copper wire with a minimum cross-section of 2.5 mm² (multi-core) or 10 mm² (single-core) to prevent electric shock.

Regular maintenance increases the life of your Siemens 6SL3130-6TE23-6AA3. Use a soft brush to clean dust from the vents on a monthly basis. Check all screws and connections for looseness, especially after vibration-intensive procedures. Replace the internal air filter every 12 months or when necessary. For software updates, utilize Siemens' STARTER tool to assure compatibility with the most recent firmware. If error codes arise (such as overcurrent problems), check the motor for short circuits or overloads.

FAQ

Q: What is the Siemens 6SL3130-6TE23-6AA3 and what is it used for?

A: The Siemens 6SL3130-6TE23-6AA3 is a three-phase Smart Line Module (SLM) for the SINAMICS S120 drive system, intended for industrial automation applications that require regenerative power control. It converts 380-480 VAC input voltage to 600 VDC output, providing up to 60 A and 36 kW of continuous power. Conveyor systems, pumps, mixers, and extruders are among the key applications that require precision motor control and energy efficiency. The module features regenerative feedback, which allows it to send excess energy back to the grid, lowering operating costs.

Q: How does the regenerative feedback feature work in the 6SL3130-6TE23-6AA3?

A: The Smart Line Module employs a diode bridge for rectification and IGBTs for regenerative feedback, resulting in 100% continuous energy return to the grid during motor slowdown or braking. This capability is especially useful for applications requiring frequent starts and pauses, such as elevators or cranes. The regenerative function can be turned off using a digital input (for 5-10 kW modules) or parameterization (for 16-55 kW modules, such as the 6SL3130-6TE23-6AA3).

Q: Can the 6SL3130-6TE23-6AA3 be used with other SINAMICS S120 modules?

A: Yes. The Smart Line Module is fully compatible with SINAMICS S120 motor modules (such as the 6SL3120 series) and control units (CU320-2 DP/PN). It supports Drive-CLiQ communication, which allows for smooth integration with multi-axis systems. For example, combining it with a 6SL3120-2TE23-0AA0 motor module yields a comprehensive driving solution for 36 kW applications.

Hot Tags: siemens 6sl3130-6te23-6aa3, China siemens 6sl3130-6te23-6aa3 suppliers, SINAMICS G120X Frequency Converter, SINAMICS G120 Frequency Converter, siemens vfd, Sinamics V20 Variable Frequency Drive