Siemens 6SL3211-0AB17-5UA1

Brand: Siemens
Model: 6SL3211-0AB17-5UA1

Inventory situation: Goods are available in stock.

Product features

Siemens 6SL3211-0AB17-5UA1 is a dependable single-phase AC drive from the SINAMICS G110 family that is specifically intended for cost-effective industrial control requirements. This Siemens 6SL3211-0AB17-5UA1 uses a single-phase 200-240V AC power supply with a voltage fluctuation range of ±10% (180-264V AC) and an input frequency of 47-63 Hz, providing stable performance even in unpredictable power settings. It has a rated power of 0.75 kW (1 HP), a rated output current of 3.9 A, and an output frequency range of 0-650 Hz-ideal for regulating the speed of low-power equipment. The drive also has a 150% overload capacity for 60 seconds, allowing it to withstand temporary peak loads without damage while increasing its endurance in daily operation.

The Siemens 6SL3211-0AB17-5UA1 is equipped with V/Hz control (voltage/frequency control) to enable precise speed management for popular industrial equipment. It offers useful features such as voltage boost (increasing low-speed torque) and slip compensation (improving speed accuracy), which address typical difficulties like low startup torque and speed variance in pumps and fans. Notably, this model lacks a built-in filter and an RS-485 connection interface, focusing solely on necessary operations to keep prices low-ideal for users who do not require complex communication or noise reduction capabilities.

The Siemens 6SL3211-0AB17-5UA1 has excellent physical and environmental performance. It measures 150 × 90 × 131 mm (H×W×D) and weighs only 0.80 kg, making it ideal for control cabinet installation. It has an IP20 protection grade and will not let solid items larger than 12 mm to enter, making it suited for indoor industrial situations. It works consistently in temperatures ranging from -10°C to +40°C (no derating) and can withstand relative humidity of up to 95% (without condensation), making it suitable for most production situations. It is also RoHS compliant, meaning it meets international environmental criteria for safe use.

Specifications

Model	6SL3211-0AB17-5UA1
Product Type	SINAMICS G110-CPM110 AC Drive
Control Method	V/Hz Control (Voltage / Frequency Control)
Certification	RoHS Compliant
Input Voltage	200-240 V AC (Single-phase)
Input Frequency	47-63 Hz
Rated Power	0.75 kW (1 HP)
Rated Output Current	3.9 A

Precautions

When using or installing Siemens 6SL3211-0AB17-5UA1, use the following measures to guarantee safe operation, a long lifespan, and optimal performance of this single-phase AC drive. First, match the power supply to the drive's requirements. The Siemens 6SL3211-0AB17-5UA1 requires a single-phase 200-240V AC input with a maximum voltage fluctuation of ±10% (180-264V AC). Using a power supply outside of this range may harm the drive or result in inconsistent speed control for your equipment, such as pumps or fans.

Because Siemens 6SL3211-0AB17-5UA1 lacks a built-in filter, you must install an additional filter separately to decrease electrical noise or meet EMC (Electromagnetic Compatibility) requirements. This is especially critical in industrial settings with sensitive electronic devices. Remember the drive's IP20 protection rating: it should be installed in a clean, dry indoor environment free of dust, moisture, and fog. Avoid placing it in areas where solid items greater than 12mm can reach the internal components, as this may result in short circuits.

Temperature management is another key aspect of Siemens 6SL3211-0AB17-5UA1. The drive operates successfully between -10°C and +40°C without derating; if the ambient temperature exceeds 40°C, the drive may overheat and shut down immediately. When mounting, provide at least 10mm of space around the drive (on all sides) to allow proper heat dissipation from the flat radiator. Do not obstruct the radiator with other equipment or wiring, since insufficient heat dissipation can reduce the drive's service life.

FAQ

Q: What is the Siemens 6SL3211-0AB17-5UA1?

A: The Siemens 6SL3211-0AB17-5UA1 is a SINAMICS S120 single motor module. It is a critical component in industrial drive technology, converting DC link voltage into variable AC voltage in order to precisely adjust the speed and torque of a single three-phase motor. This module is part of Siemens' high-performance drive system, which is utilized in a variety of automation applications, including machine tools and material handling systems.

Q: What are the key technical specifications of the 6SL3211-0AB17-5UA1 module?

A: This Siemens SINAMICS S120 motor module is rated for a 600V DC link input and has an output current of 17A and 7.5 kW (at 400V AC). It is intended to operate on a 3-phase AC supply voltage of 380-480V at 50/60 Hz. It has a high efficiency rating (up to 98%) and supports Profinet and PROFIBUS communication with an extra Control Unit (CU), allowing for simple integration into automated systems for accurate motor control.

Q: What is the difference between a Single Motor Module and a Cabinet Module in the SINAMICS S120 range?

A: The 6SL3211-0AB17-5UA1 is a Single Motor Module (SMM) intended for compact, book-type format installations. It is frequently used in multi-axis systems, where modules are put side by side on a heatsink. A Cabinet Module is a chassis-type item intended for standalone cabinet installation. The SMM, like this type, is best suited for space-constrained machine building applications that require centralized control of several axes.