Siemens 6AV2124-0UC02-0AX1

Brand: Siemens
Model: 6AV2124-0UC02-0AX1

Inventory situation: Goods are available in stock.

Product features

A high-performance industrial HMI device from the SIMATIC HMI TP1900 Comfort series, the Siemens 6AV2124-0UC02-0AX1 was created especially for dependable operation in industrial automation settings. The Siemens 6AV2124-0UC02-0AX1's 19-inch widescreen TFT color display (with an actual screen diagonal of 18.5 inches) is one of its primary features. With a resolution of 1366 x 768 pixels and the ability to display up to 16 million colors, the display offers crisp, colorful images for operation menus and process data. To improve operational efficiency, it makes use of a capacitive multi-touch screen with up to 40 direct touch buttons that can be used as S7 input I/O.

The Siemens 6AV2124-0UC02-0AX1 has several interfaces to satisfy the demands of industrial communication. It supports PROFINET, TCP/IP, and other popular industrial protocols and has two industrial Ethernet ports with switch functionality in addition to one independent Ethernet port. Additionally, there are two USB 2.0 interfaces, one RS 422/485 combined interface for PROFIBUS/MPI communication, and two SD card slots (supporting up to 2 GB SD cards) for data storage and transfer. The 6AV2124-0UC02-0AX1 HMI touchscreen is compatible with a number of Siemens PLCs, including the S7-1200, S7-1500, and S7-300, as well as other industrial controllers, thanks to these interfaces.

The Siemens 6AV2124-0UC02-0AX1 has a voltage range of 19.2V to 28.8V DC and runs on 24V DC power. With a rated current of 1.7A and a typical power consumption of 41W, it is stable and energy-efficient for long-term industrial use. The device's IP65 protection rating on the front makes it waterproof and dustproof, making it appropriate for challenging industrial settings. When installed vertically, it can function normally at temperatures between 0°C and 45°C, which satisfies the requirements of the majority of indoor industrial sites.

Specifications

Model	6AV2124-0UC02-0AX1
Product Name	SIMATIC HMI TP1900 Comfort
Product Series	Comfort Panels
Operation Method	Pure touch operation (no physical buttons)
Number of Colors	16,777,216 colors (16 million colors)
Resolution	1366 × 768 pixels (widescreen)
Power Supply Type	DC 24V
Rated Current	1.7A

Precautions

When installing Siemens 6AV2124-0UC02-0AX1, it is critical to adhere to the prescribed installation procedures. This Siemens SIMATIC HMI TP1900 Comfort panel is intended for indoor use only; thus, do not install it outside where it may be exposed to rain, direct sunshine, or extreme weather. The device's front has an IP65 protection certification, while the back is IP20, therefore make sure the installation area protects the back from dust, water splashes, and other dangerous chemicals. The suggested installation technique is vertical mounting, and if tilting is required, the angle should not exceed 35° to prevent impairing the display effect and touch response.

Siemens 6AV2124-0UC02-0AX1's power supply requires a 24V DC power source with a voltage range of 19.2V to 28.8V. Connect it to a reliable power supply to avoid damaging the gadget or causing faults in industrial process monitoring. Before attaching power, double-check the wiring to avoid reverse polarity, which can cause short circuits and irreparable damage to the 6AV2124-0UC02-0AX1 HMI touchscreen.

When configuring Siemens 6AV2124-0UC02-0AX1, use the appropriate setup software. The minimum requirement is WinCC Comfort V14 SP1 (with HSP) or higher. Using out-of-date or incompatible software may cause the configuration to fail, or the device may not function properly. Pay attention to the variable limit throughout the setting process: the device can handle up to 4,096 variables per device and 400 variables per screen; therefore, do not exceed these limits to maintain steady functioning.

FAQ

Q: What is the Siemens 6AV2124-0UC02-0AX1?

A: The Siemens 6AV2124-0UC02-0AX1 is a replacement part and accessory for Siemens SIMATIC HMI (Human Machine Interface) panels. It is an original Siemens memory card, typically a CompactFlash (CF) card, that has been pre-loaded with the operating system and applications for certain HMI device models. It is critical for device operation, replacement, and restoration.

Q: Which Siemens HMI devices use the 6AV2124-0UC02-0AX1 memory card?

A: This memory card works with numerous SIMATIC HMI Multi Panels and Mobile Panels. Commonly comparable series include the MP 277, MP 377, Mobile Panel 277, and similar generations. It is critical to confirm exact compatibility in the device manual or on the Siemens industry mall product site, as using the wrong card can create problems.

Q: Can I use a standard commercial CompactFlash card instead?

A: No, this is strongly discouraged. The 6AV2124-0UC02-0AX1 is not a regular blank CF card. It typically includes a proprietary Siemens operating system image as well as special license files. A generic card will not have this software, rendering your HMI panel useless. Always use a genuine Siemens accessory to maintain system dependability and integrity.