Mitsubishi FR-E840-0095-4-60

Brand: Mitsubishi
Model: FR-E840-0095-4-60

Inventory situation: Goods are available in stock.

Product features

The Mitsubishi FR-E840-0095-4-60 is a dependable 3-phase 400V general-purpose inverter with robust performance and useful features for a range of equipment intended for industrial use. Under light load (LD) conditions, the Mitsubishi FR-E840-0095-4-60 operates with 5.5 kW motors; for standard load (ND) applications, it uses 3.7 kW motors. It helps businesses reduce their energy expenses by fitting permanent magnet synchronous motors, energy-efficient IE3/IE4 high-efficiency motors, and Mitsubishi 4-pole standard motors. It is compatible with the majority of industrial power systems around the world because it operates with 50/60 Hz power supplies and has an input voltage range of 380V to 480V (with a tolerance of 323V to 528V).

The Mitsubishi FR-E840-0095-4-60 has a rated capacity of 8.5 kVA for light loads and 7.2 kVA for standard loads. Its rated currents are 11.1 A (LD) and 9.5 A (ND), respectively. It manages overloads well, maintaining steady operation even under high demands: 120% for 60 seconds and 150% for 3 seconds under light load, and 150% for 60 seconds and 200% for 3 seconds under standard load. Flexible speed control is made possible by the output frequency, which for induction motors ranges from 0.2 Hz to 590 Hz and for permanent magnet motors from 0.2 Hz to 400 Hz.

The Mitsubishi FR-E840-0095-4-60 has an integrated braking transistor and can support external braking resistors (FR-BR series) for powerful braking. Under normal load conditions, the maximum braking torque is 100%. You can tailor it to meet particular requirements with optional accessories like DC reactors (FR-BEL), EMC filters (FR-BIF), and communication cards (e.g., CC-Link, PROFIBUS-DP). It has SIL2/PLd safety torque off (STO) functionality for increased safety and complies with international standards like CE and TÜV.

Specifications

Model	FR-E840-0095-4-60
Light Duty (LD)	5.5 kW
Standard Duty (ND)	3.7 kW
Voltage Range	Three-phase 380–480 V
Frequency	50/60 Hz (±5%)
Synchronous Motor (Induction Motor)	0.2–590 Hz
Permanent Magnet Motor	0.2–400 Hz
Dimensions	Width 140 mm × Height 150 mm × Depth 135 mm

Precautions

First, pay close attention to installation conditions for the Mitsubishi FR-E840-0095-4-60. This inverter, which has an IP20 protection rating, needs to be installed inside a closed control cabinet to keep out dust, water splashes, and foreign objects. Any exposure to these elements could result in component damage or short circuits. Make sure there is adequate ventilation in the cabinet. The inverter works best at temperatures between -20°C and 60°C, and you must reduce its rated current above 50°C (e.g., 9.4A for light load instead of 11.1A). Keep the space surrounding it open for heat dissipation and avoid placing it close to heat sources like heaters or motors. To prevent overheating when using it at elevations higher than 1000 meters, lower the rated current by 3% for each extra 500 meters.

Second, handle power connection carefully with the Mitsubishi FR-E840-0095-4-60. This inverter is designed for 3-phase 380V-480V power supplies-never connect it to single-phase power or voltages outside the 323V-528V range, as this will damage the internal circuits. Ensure the input wires are correctly connected to the L1, L2, L3 terminals (and N terminal if needed) and that all connections are tight-loose wires can cause arcing or voltage drops. Before wiring, always turn off the main power and wait for the inverter's internal capacitors to discharge (at least 5 minutes) to avoid electric shock.

FAQ

Q: What is the Mitsubishi FR-E840-0095-4-60, and what are its primary applications?

A: The Mitsubishi FR-E840-0095-4-60 is a small, powerful general-purpose inverter from the FR-E800 series. It is extensively utilized in sectors like food processing, electronics, packaging, printing, and general automation and is made for precise motor speed control. Optimizing system performance, promoting energy-efficient operations, and making integration into industrial IoT (Internet of Things) systems simple are some of its primary duties.

Q: What is the difference between the FR-E840 series and the FR-F840 series?

A: With an emphasis on usability and Internet of Things connectivity, the FR-E840 series is a small, multifunctional inverter made for a variety of uses. On the other hand, the FR-F840 series is an energy-efficient inverter model with a higher capacity that can manage motor loads up to hundreds of kilowatts. For demanding applications, the "F" series frequently has more sophisticated energy regeneration features.

Hot Tags: mitsubishi fr-e840-0095-4-60, China mitsubishi fr-e840-0095-4-60 suppliers, FR E740 0 4K CHT Mitsubishi E700 Series Inverter, mitsubishi vfd, Mitsubishi FR CS84 080 60